Hair style boys and cutting：You can collect a spray bottle, acrylic ink, and high strength rubbing alcohol. Make sure its acrylic ink, otherwise it won’t work.
In a cup mix together the acrylic ink and the rubbing alcohol. A good guideline to follow is 1/2 cup alcohol to about ten drops of ink. You don’t have to follow this . Use your eyes and mix till you get the desired color. Some shade require a lot more ink than others.
Set up your wig in an area that is okay to get messy and take as many precautions as possible to prevent staining. This stuff will stain and there is a good chance won't come out. I suggest doing this outside on a tarp.
Once your wig is set up, turn your wig upside down and spray the entire bottom layer, make sure to gently comb through it. Once the bottom is covered, flip the wigs over and repeat the process, go through weft layer by weft layer. Make sure to cover all the fibers but not to over saturate.
Let the wig dry fully. You can use a blow dryer to help speed this up.
Once the wig is dry, rinse, rinse, rinse! Rinse until the water fully runs clear. These are could take a while. You may have to let the wigs dry, brush it out, then rinse again if you use lots of ink. This will help prevent the color rubbing off on clothing and your skin so it’s well worth the time you put into it.